How to Clean cold Air intake Filter? Cold air intakes are designed to filter the air being inhaled by vehicles equipped with clogged air filters. The objective is to provide the engine with more unencumbered airflow by removing the clogged air filter and replacing it with a larger one.
There is protection for those airflow passages in the form of a filter that removes any contaminants or particles near your vehicle’s gasoline-powered engine. For this reason, it’s essential to keep your filter clean.
The cold air intakes boost performance by increasing the volume of air going to the engine. Unluckily, there is also a great deal of dirt and dust that comes with the volume increase. The increased flow of air also calls for more frequent cleaning of your cold air intake filter since much more air is passing through it.
This article will explain the steps required to clean a cold air suction filter. This procedure is relatively simple and can be accomplished using standard tools such as wrenches.
Read More: HOW TO RESET TRANSFER CASE CONTROL MODULE SILVERADO
Easy guide on how to clean cold air intake filters.
Clearing out the dirt & debris from your cold air intake filter may be time-consuming and challenging. However, follow these steps, and you will clear the dirt & debris off of your reliance on your cold air intake filter.
1.Clean Cold Air Intake Filter
Remove the vehicle’s cold air intake filter by handling it counterclockwise with a wrench or a socket set. When removing this filter, make sure you use the proper torque setting for this approach. Your vehicle s manufacturer’s specifications will direct the torque setting.
2. Be sure the surface is free of debris.
Thoroughly inspect your filter’s construction for any visible particles or any dirt or mud that have gotten stuck on it during your travel or daily commute. Use a wash rag moistened with warm water to gently remove any dirt close to the surface of the filter.
3.Give Filter Media A Thorough Rinse
Make sure no dust or debris is stuck to the filter media surface. Once you are confident that it is spotless, go ahead and rinse out the whole assembly under warm, running tap water. Using your hands, delicately squeeze out excess water from the filter media.
4.Allow Filter To Dry Before Reassembling
It would be super best if you allowed the filter assembly to dry completely before reassembly and put it in storage out of harm’s way. Please put it on a non-metal surface, free of debris and away from machinery or moving parts.
5.Reinstall Cold Air Intake Filter Assembly
Follow the torque specification for your vehicle’s make, model, and engine size to reinstall your air intake filter. In some cases, such as in models, when others have removed it incorrectly, you will need to turn the filter clockwise into its proper location.
6.Test Drive Your Vehicle To Check Performance
If the cold air intake filter isn’t doing its job, then follow the steps above to make sure there is a change in how your car runs. You can then finish your work by checking if there was any change in the performance of your car after cleaning it up.

Read More: HOW TO REMOVE SPEED LIMITER ON CHEVY SILVERADO
7.Must Check Hardware To Make Sure Everything Is Tight & Secure
Make sure all the bolts on your vehicle’s air intake system are tightened and use a torque wrench if you have one. Ensure that your car runs efficiently by checking for signs of clogged components and potentially expensive repairs.
What attachment should I select when cleaning the cold air intake filter?
Regardless of the required cleaning, use the right tools for the job. For instance, a feather duster or a microfiber cloth is best suited for wiping down a large area, such as a room or a distressed piece of furniture.
It would be best if you used an attachment to remove dust from your car’s cold air intake filter. This might include utilizing a foam brush (for small areas), a car washing brush (for large areas), or a garden hose (to give a vigorous clean of thick dirt).
Always avoid using implements like sharp items and wire brushes when cleaning your cold air intake filter. Damage to these components will decrease airflow through the filter relative to the manufacturer’s specifications.
What kind of filter material should you use?
When choosing cold air intake filters, the material used to construct the filter should work as an excellent filter for trapping dirt particles while facilitating enough airflow through the device.
One of the best air filters available for a good choice for your cold air intake filter is made with either cotton or polyester. These materials are well known for trapping the tiniest dirt particles and still allowing adequate airflow.
Read More: HOW TO GET AIR OUT OF BRAKE LINES WITHOUT BLEEDING
Can you clean a reusable external air intake filter?
To protect your vehicle’s winter air intake system, clean it with a high-powered water hose. Then, when you’ve gotten rid of the kelp clogged-up filter, let it sit overnight under sun-drying before putting it back into your car’s cold air intake system.
Alternatively, you can also try using a thin cloth or paper towel to remove any excess dirt on the filter material. However, you should only use this method if you plan to replace the reusable air intake system’s filter material with a new one soon after.
To wash your entire cold air intake filter system, follow these steps.
1) You can Start by removing the filter from the engine
2) Use a high-pressure water cleaner to spray off the filter material
3) Clean off any extra dirt build-up with a cloth or paper towel
4) Allow the filter to dry before placing it back into your car’s cold air intake system. You can also try using compressed air to dry it out even faster.
When I clear my cold air intake filter system?
Note that a dirty, cold air intake filter can cause your car performance issues. For this reason, you should make it a point to check and clean it routinely, at least once per month.
If you change your clogged cold-air intake filter, your automobile will need to burn more fuel and money because of its efficiency. So verifying the health of your air intake filter might be a great way to enhance your motor vehicle’s overall performance.
An obstruction isolating a cold air intake tube or an accumulation of dust can be a hazard to your automobile’s functionality if you let it lapse for a long time. Over time, the dirt trapped in your system can result in components of the engine corroding and rust, which can increase the possibility of malfunctioning your automobile.
Due to a dirty, cold air intake filter, your vehicle’s engine will suffer, affecting its performance. Because of this, we recommend adhering to your manufacturer’s regular service schedule by clearing out any dirt or debris that has become trapped in your engine’s system throughout each month.
Read More: HOW TO TEST ALTERNATOR WITH SCREWDRIVER
What If You Find That Your Cold Air Intake Filter Is Broken?
If you notice that your cold air intake filter is broken, then replace the system with a new one immediately. A blocked or dirty cold air intake filter system will lead to increased fuel consumption over time and should be cleaned regularly so this will not happen.
Not only will using a cold air intake filter prevent corrosion and rust damage, but it will also help your car perform better by allowing adequate air while keeping all the dirt particles out.
Final Verdict
Ensure the cold air intake filter is kept clean to increase car performance and fuel efficiency. Clean it with an old brush or vacuum cleaner like at home.
When washing out your cold air intake system, avoid using implements such as heavy machinery or sharp objects since they may cause damage to the system. Contact your local car parts store for assistance if you cannot clean it.
Furthermore, you should clean and check the cold air intake filter at least once per month. This will reduce the likelihood of dirt and debris causing a clog. If the material inside is too dirty or wet, leave it out to dry for a couple of days before placing it back into your engine.